Most of the styles of business hotel furniture are modern and simple. The main reason is that such business hotels are more in the center of the urban area and occupy a smaller area, so they pay attention to simple modern style. The configuration of hotel furniture should consider moisture-proof and anti-corrosive materials and more leisure hotel furniture. Here are the points need to be concerned while looking for commercial hotel furniture.
1.The moisture content of the wood does not exceed 12%
The moisture content of hotel furniture must not exceed 12%. The moisture content is high, and the wood is easily warped and deformed. If you feel moisture, then the moisture content is at least 50% or more. Another way is to spray a little water on the painted area of the wood. If it is slow or not, it means that the moisture content is high.
2. Whether the hotel furniture materials are reasonable
Different hotel furniture and surface materials are various. For example, the legs of tables, chairs and cabinets need to be made of hard mixed wood, which is strong and able to bear the weight, and other materials can be used for the internal materials. The thickness of the legs of the closet is 2.5cm. Deformation; kitchen and bathroom cabinets cannot be made of fiberboard, but plywood should be used, because fiberboard will swell and damage when exposed to water; dining tables should be washable.
3. Whether the hotel furniture structure is firm
Small pieces of hotel furniture, such as chairs, stools, and hangers, can be dragged on the concrete floor when they are selected, and they are gently dropped. The sound is crisp and the quality is good; Tight and structurally weak. The writing desk and table can be shaken by hand to see if it is stable.
4. Are the four legs of the hotel furniture flat?
At this point, you can know that even on a flat floor, some hotel furniture has only three legs to the ground. See if the table is straight, and you can’t bow your back or collapse your waist. The table top is raised, and the glass plate will rotate when placed on it; the table top is recessed, and the glass plate is broken when placed on it. Pay attention to check the door of the cabinet. The slit of the drawer should not be too large.
5. The stitching of the veneer hotel furniture is not strict
Whether it is sticking wood veneer, PVC, or pre-painted paper, pay attention to whether the leather is flat, whether there are bulging, blistering, and loose seams. Look at the light when you check it. As far as wood veneer is concerned, planed veneer is better than rotary cutting. The way to identify the two is to look at the pattern of the wood. The texture of the sliced veneer wood is straight and dense, and the pattern of the veneer that is cut is curved and sparse. The particle board should be covered with hotel furniture.